Submittal Sheet

Materials
Temperature – Pressure
2
1
⁄2" - 4"
A
B
C
D
E
F
G
H
I
J
K
J
L
A
H
E
F
G
B
C
D
I
J
J
L
K
A Handle Nut Zinc plated carbon steel
B Handle Assembly Zinc plated carbon steel with
vinyl insulator
C Packing Nut Brass
D Stem Packing Virgin PTFE
E O-ring Fluorocarbon elastomer (FKM)
F Thrust Washer Virgin PTFE (for the 2" - 4")
G Stem Brass
H Tag Cardboard, Mylar coated both sides
I Body Forged Lead Free* copper silicon
alloy
J Seats Virgin PTFE
K Ball Chrome plated Lead Free* brass
L Adapter Forged Lead Free* copper silicon
alloy brass
Options
SS Stainless steel ball and stem
TH Tee handle
QC Quick connect
CC Cap and chain
* See application note on reverse side for solder end valves with regards to
pressure/temperature rating.
Specifications
Approved valves shall be a Lead Free* 2-Piece, Full Port, Ball
Valve shall be constructed with Lead Free* materials. Lead Free*
valves shall comply with state codes and standards, where appli-
cable, requiring reduced lead content. Seats and stem packing
shall be virgin PTFE. Stem shall be bottom loaded, blowout proof
design with fluorocarbon elastomer O-ring to prevent stem leaks.
The valve shall have chrome plated Lead Free* brass ball and
adjustable packing gland.
Threaded valves
1
⁄4" – 2" shall be CSA approved to
1
⁄2, 5, and
125psig (14, 34 and 862 kPa), UL/FM approved and
1
⁄4"– 4"
certified to NSF/ANSI standard 61/8. Solder valves
1
⁄2" – 2" to
be UL listed FM approved, and certified to NSF/ANSI standard
61/8. Valve sizes
1
⁄4" – 2" shall be rated to 600psi (41 bar) WOG
non-shock and 150psi (10.3 bar) WSP. Valve sizes 2
1
⁄2" – 4"
threaded, shall be rated to 400psi (27.5 bar) WOG non-shock
and 125psi (8.6 bar) WSP. Valve sizes 2
1
⁄2" – 3" solder shall be
rated to 400psi (27.5 bar) WOG non-shock and 125psi (8.6 bar)
WSP. Valve shall be a Watts Series LFFBV-3C-M1 (threaded) or
LFFBVS-3C-M1 (solder).