Specification
For Agricultural and Industrial Applications
ES-ANKA-AFU
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
Materials
Body: Glass Fiber Reinforced Nylon
O Ring : Nitrile Rubber
Threads: NPT threads
Maximum Working
Pressure:
230 psi (1600 kPa) (16 bar)
@ 20°c
These pipe unions are made from the high grade glass
reinforced nylon and are designed so they can be used in
place of traditional metal fittings, with the advantage of being
non-corrosive.
Features
• Can be taken apart for servicing
• Maximum pressure of 230 psi (1600 kPa)
• Strong Design
• Full Flow
• Non-Corrosive; using high quality materials
Applications
• Pumping
• Irrigation
• Plumbing
• Marine
• Industry
• Agriculture
Models
AFU34 US — ¾" (20mm)
AFU1 US — 1" (25mm)
AFU114 US — 1¼" (32mm)
AFU112 US — 1½" (40mm)
AFU2 US — 2" (50mm)
ANKA
®
AFU Series
Female Pipe Unions
Sizes: ¾" – 2" (20 – 50mm)
The information contained herein is not intended to replace the
full product installation and safety information available or the
experience of a trained product installer. You are required to
thoroughly read all installation instructions and product safety
information before beginning the installation of this product.
NOTICE
ES-ANKA-AFU 1750 © 2017 Watts
USA: T: (978) 689-6066 • F: (978) 975-8350 • Watts.com
Canada: T: (905) 332-4090 • F: (905) 332-7068 • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.