Specification

For Commercial and Institutional Applications
ES-ANKA-QL
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
Models— Range ¾" – 1½"
AQLCM34 US — ¾" (20mm)
AQLCM1 US — 1" (25mm)
AQLCM114 US — 1¼" (32mm)
AQLCM112 US — 1½" (40mm)
AQLCF34 US — ¾" (20mm)
AQLCF1 US — 1" (25mm)
AQLCF114 US — 1¼" (32mm)
AQLCF112 US — 1½" (40mm)
These quick-lock couplings are made from high grade glass
fiber reinforced nylon. These quick-action couplings are
designed to be put together and taken apart in one easy twist
action. Because the seal ring end is a consistent size, each
coupling is interchangeable, allowing a wide range of configura-
tions. Quick-lock couplings are used in farming, irrigation, and
industry applications.
Features
• Quick and easy to use.
• Connect or take apart with one easy twisting motion.
Applications
• Pumping
• Marine
• Wash down
Materials
Body: Glass fiber reinforced nylon
Seal: Alcryn
Threads: NPT Threads
Maximum Working Pressure:
150 psi – 1000 kpa (10 bar) @ 68ºF (20º C)
ANKA
®
QL Series
Hose Quick-Lock Couplings
Sizes: ¾" – 1½" (20 – 40mm)
The information contained herein is not intended to replace the
full product installation and safety information available or the
experience of a trained product installer. You are required to
thoroughly read all installation instructions and product safety
information before beginning the installation of this product.
NOTICE
ES-ANKA-QL 1750 © 2017 Watts
USA: T: [phone] • F: [phone] • Watts.com
Canada: T: [phone] • F: [phone] • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.