User's Manual

Communicating with the Host
Using the Cradle
The CS 1000 cradle is used to perform
communications with a host PC. To set up the cradle
for operation:
1. Plug one end of a null modem cable (p/n
59846-03-00) into the communications port
located on the left end of the cradle.
2. Connect the other end of the cable to the host
computer’s serial (COMM) port.
3. Provide power to the cradle by plugging the
power supply’s round connector into the
power port on the cradle and the other end of
the power cable in an electrical outlet.
4. Insert the WT 2200 in the cradle (the ring
scanner can be attached).
5. Start the communications program as detailed
in the WT 2200 Product Reference Guide.
Radio Communications
Wireless communication with the host is available