User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User
Regulations (Appendix D)-4
Warning! This part 15 radio device operates on a non-interference basis with other
devices operating at this frequency when using the antennas: 24 dBi grid antenna and
8 dBi omni antenna.
Declaration of Conformity for RF Exposure
The radio module has been evaluated under FCC Bulletin OET65C and found
compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and
15.247 (b) (4) addressing RF Exposure from radio frequency devices. For the 24-dBi
antenna, the equipment should be positioned more than 2 m from your body or nearby
persons. For the 8-dBi antenna, the equipment should be installed more than 20 cm
from your body or nearby persons.
Manufacturers Canadian (IC) Declaration of Conformity
Statement
This Class B Digital apparatus meets all the requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le
material broilleur du Canada. This device complies with Class B Limits of Industry
Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
The device is certified to the requirements of RSS-139-1 and RSS-210 for 2.4-GHz
spread spectrum devices. The use of this device in a system operating either partially or
completely outdoors may require the user to obtain a license for the system according
to the Canadian regulations. For further information, contact your local Industry
Canada office.
!
!!
!