User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
Specifications (Appendix E)-2
9000 Series Technical Specifications
Radio
Type: Direct Sequence Spread Spectrum (DSSS)
Frequency: 2.4 GHz (2.4000 to 2.4835)
Channels: 11 user selectable channels
Modulation: CCK at 11 Mb/s & 5.5 Mb/s, DQPSK at 2 Mb/s, DBPSK at 1 Mb/s
Processing Gain: 11dB (Nominal)
Communication Method: Half-duplex
Transmit Power: 15 dBm (typical)
Receiver Sensitivity: Max -92dBm (-82 dBm at 11 Mb/s)
Bandwidth Signal: 22 MHz
Power Supply Input: 100-250 VAC, 47-62 Hz
External Antenna Connector: Reverse TNC (models 9101/9103)
Wired LAN Interface
Compliance: IEEE 802.3 Ethernet
Physical Interface: 10/100 Base T (RJ-45)
Network Protocols Supported: IP, TCP, UDP, ICMP, RIPv1, RIPv2, TFTP, IGMP, ARP, DHCP relay, DHCP server,
DHCP client, NAT, NAPT
Wireless LAN Interface
Standard Wireless Interface: Single 11 Mb/s interface
RF Physical Interface: RTNC bulkhead RF connector
Bit Error Rate: Better than 10 -5
Configuration & Management
Upgradeability: Firmware is upgradeable via in-band management
Configuration & Monitoring: Web-based
SPEEDView operates under Windows 95, 98, NT, 2000, XP, ME, Linux (available but unsupported)