User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
6-6 Using the Configurator to Set Up Special Parameters for Point-to-Point Routers
Primary Station Information
To see if a secondary point-to-point router is connected to the primary point-to-point
router, choose Primary Station Info from the Network menu. The following page will
appear.
Note: If there is no connection to the primary point-to-point router, a message will
appear confirming that the secondary point-to-point router is not connected to the
primary point-to-point router.
Figure 6-4: Primary Station Information page
Authenticating a Point-to-Point Secondary Router Only
If you are only in point-to-point secondary mode only, you can authenticate the router
on this page.
Note: All interfaces connected to the 9000 router are restricted to systems based on
the authentic pass phrase (or password). Any interface that does not have the correct
pass phrase will not be able to establish a data connection.