User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using the Configurator to Set Up Special Parameters for Point-to-Point Routers 6-9
1 2.412
2 2.417
3 2.422
4 2.427
5 2.432
6 2.437
7 2.442
8 2.447
9 2.452
10 2.457
11 2.462
• Signaling Rate: This setting refers to the wireless signaling rate. The
SPEEDLAN 9000 routers have four signaling rates that can be used.
Select one of the following check boxes:
• 1 Mb/s: This setting limits the card by providing 1 Mb/s of bandwidth.
The minimum receiver sensitivity of the radio with this setting is -92 dBm.
• 2 Mb/s: This setting limits the card by providing 2 Mb/s of bandwidth.
The minimum receiver sensitivity of the radio with this setting is -89 dBm.
• 5.5 Mb/s: This setting limits the card to providing 5.5 Mb/s of
bandwidth. The minimum receiver sensitivity of the radio with this setting is
-88 dBm.
• 11 Mb/s: This is the full 11 Mb/s signaling rate. This value is
recommended for most installations. The minimum receiver sensitivity of
the radio with this setting is -85 dBm.
Note: The network can automatically downgrade the bandwidth if needed (that is, if
lower Mb/s settings are selected). Click Apply when finished.