User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03

Using the Configurator to Set Up Special Parameters for Point-to-Point Routers 6-13

Admin Menu

Remote Control for Point-to-Point Primary Routers

To remotely reboot or turn off the SPEEDLAN 9000 point-to-point primary routers,

choose Remote Control from the Admin menu. The following page will appear.

Figure 6-9: Remote Control for point-to-point primary mode (in Primary mode)

Select the primary point-to-point routers you want to reboot and click Reboot Selected

Nodes.

All other common configuration information can be found in General Functions of the

Configurator, page 3-1.

Software Update for Point-to-Point Primary or Secondary

Routers

Note: The Software Update zip file (found on the Wave Wireless web site under the

Support + Firmware link) will contain a document describing the recent changes and

any other additional information needed to perform the update. The zip file will also

include the update (.wwn) file to perform the update.