User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using the Configurator to Set Up Special Parameters for CPE Routers 5-5
station and on a CPE. (Pass Phrases have a minimum of 8 characters and a
maximum of 32 characters.)
• Confirm: Enter the pass phrase again to ensure it is correct. Make sure you
keep the pass phrase in a safe place.
Wireless menu
Choose Configuration from the Wireless menu and you will be able to choose one of
the following:
• If you click the Channel and Rates button, you will be able to select the
channel and signaling rate of the interface. For more information, see
Channel and Rates, page 5-6.
• If you click the Tx Retries button, you will be able to set the Transmit Retry Limit
and Signaling Rate Fallback. For more information, see Max Tx Retries and
Signaling Rate Fallback, page 5-8.
• If you click the Max Throughput button, you will be able to set the Max
Transmit Data Rate in Kb/s. For more information, see Max Throughput
(Regulating Bandwidth), page 5-10.