User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
7-6 Using the Configurator to Set Up Special Parameters for Mesh Routers
• If you click the Blocked Links button, you will be able to block or unblock
mesh routers. For more information, see Blocked Links, page 7-12 for more
details.
Figure 7-4: Channel and Rates page
Channel and Rates
• Primary Firmware: This is the current primary firmware version in use by the
wireless card.
• Station Firmware: This is the current station firmware version in use by the
wireless card.
• Channel: This is the specific band of frequencies (from 1 to 11) to determine
the data path between routers. All routers expected to communicate in each
pico cell must have the same channel (frequency).
Select one of the following channels (all are represented in GHz) from the
Channel drop-down list:
(Mesh)