User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
8-6 Using SPEEDView
Star Network
Figure 8-4: Star network diagram
Note: A star network consists of a group of remote nodes, called Customer Premise
Equipment (CPE), and a base station. A star network is based on a star topology with
the base station in the center of the star network. Each CPE must have clear line-of-
sight to a base station. (The star node icons are aligned symmetrically.)
You can also use SPEEDView for a point-to-point network. An example can be seen in
the section called SPEEDLAN 9000 Mesh Protocol -- How It Works in Mesh Clouds,
page 1-8.
Wireless Hostname & IP address
Wired hostname & IP address/
netmask
Note: Firmware version
Wave_1: 10.0.15.15
192.168.59.1/24
Version 2.10
Note: This diagram shows the
wireless IP, wired IP, firmware
version and hostname. These
buttons are available on the
Options tab.
1.20
will appear if selected on
Options tab.
base station
Label will
turn red for
its link that
disappears.