User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
8-12 Using SPEEDView
View menu
•
Message Toolbar: Choose Message Toolbar to display the test message box
just under the Node menu.
• Bandwidth Toolbar: Choose Bandwidth Toolbar to display a shortcut version
of the bandwidth test (displays results of traffic moving in both directions of the
selected link). Next, you will see the bandwidth toolbar appear on the top of
the Main tab, as circled in Figure 8-7 on page 8-12.
Figure 8-7: Bandwidth Toolbar
Choose the duration: 15, 30 or 60 seconds. Then, click Bandwidth Test. The
results will be displayed in the box to the right of the Bandwidth Test button.
• Zoom: Choose Zoom to zoom in or out.
• Refresh: Choose Refresh to request new hostnames and Ethernet wired IP
addresses.
Stats menu - These are only available for star and point-to-point networks.
•
Show All Link Stats: Choose Show All Link Stats to display all the statistics of
all of the links in the statistics window (bottom half of Main tab). For more
information, see Accessing the Statistics Tabs on Bottom of Main Tab,
page 8-16.
• Clear Stats: Choose Clear Stats to remove the statistics of the links in the
statistics window (bottom half of Main tab).
Buttons (on the Main tab)
• Send: Click this button to send a UDP-based test message to any node on the
9000 network. Select the test message from the drop-down list such as: Hello,
Goodbye, Testing, Marco or Polo (located just under the Main tab).
Figure 8-8: Send button
results here