User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using SPEEDView 8-21
• Dest: The filter items only applies to the destination of the packet.
Filter items
• IP Address: Use this to include (exclude) the display of packets destined for or
coming from (or both) to a given network host.
• Port: Use this to include (exclude) the display of packets destined for or
coming from (or both) a given network port. Select port by protocol: HTTP
(80), POP3 (110), SMTP (25), TELNET (23), FTP (21), FTP_Data (20), SSH
(22) or Custom (the port you enter).
• Protocol: Select either ARP (Address Resolution Protocol), IP (Internet
Protocol), TCP (Transmission Control Protocol), and UDP (User Datagram
Protocol)
• Interface: The wired (i.e., eth1) or wireless (i.e., wlan1) interface where the
device is connected.
• Include Selected From Above: Click to enter the selected criteria into the
“Include” filter list.
• Exclude Selected From Above: Click to exclude the selected criteria into the
"Exclude" filter list.
• Remove Selected: Highlight the filter criteria you want to remove and click
this button.
• Clear: Click to remove all filter criteria items from this box.
Select the boxes next to the filter item(s) that you would like to define.