User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
8-24 Using SPEEDView
• Trace Icon: This displays which Trace Route icon (yellow star or black dot) will
appear on the network diagram (on the Main tab). The default is shown in
Figure 8-17 on page 8-24).
Figure 8-17: Trace icon
• Next button: Select this button to move forward.
• Previous button: Select this button to move backward.
• Configurator Options:
• The drop-down list to the left lets you connect directly to SPEEDView or via
proxy. Using Connect with Proxy is the default because you will likely not
have a TCP route to all nodes in the SPEEDView network diagram. In this
mode the connection is proxied through the 9000 node where it is con-
nected. Selecting Connect Directly is faster, but it assumes you do have a
direct route to the 9000 node you are trying to configure (and it must
have a route back to your computer).
• The drop-down list to the right allows 4 available ports to configure each
9000 node.
• If you do not want to reboot any nodes, click Select None.
Note: To view version and license information, click the About tab.