User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
Glossary-4
Class
Understanding this methodology is difficult, even for customers. Therefore, let’s explain this in easier terms.
The first octet (or octets) defines the “class” (indicated by the word “net” in this example) of the address,
which is the only method to tell the size of the network (how big) and where the internet address belongs. The
remaining octets indicate availability for network equipment (i.e., computer or other network equipment). The
three main classes are: Class A, Class B, and Class C.
• Class A: Net, Node, Node, Node 255.0.0.0 (last three octets are available for equipment)
• Class B: Net, Net, Node, Node 255.255.0.0 (last two octets are available for equipment)
• Class C: Net, Net, Net, Node 255.255.255.0 (last octet is available for equipment)
Coaxial Cable
A type of transmission line consisting of a center conductor wire surrounded by insulation that is in turn
surrounded by a conductive shield made of metal foil or wire braid. Often used to connect the RF unit and
modem unit of a wireless system.
Code Division Multiple Access (CDMA)
A system in which all users occupy the same bandwidth. Uncorrelated codes are used to allow for higher
bandwidth occupancy. This is also known as the spread spectrum system.
Common Management Information Protocol (CMIP)
A network management protocol that is consistent with an Open Systems Interconnection (OSI) network
communication model.
Company name
This is the name of the company that owns or maintains the radio given to the terminal.
Console
This device allows you to communicate through the Telnet client to access the configuration software.
Crimp
Crimp the connector to secure the conductors.
Customer Premise Equipment (CPE)
Any equipment located at the customer site. Usually in reference to those that are connected to a network.