User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide

Appendix F (SPEEDSignal)-8

• Click the Enabled option to enable communication with SPEEDSignal.

• Click Disabled to disable communication with SPEEDSignal. Click Apply

when finished.

Opening SPEEDSignal on the Desktop PC

To open SPEEDSignal on the desktop PC, follow these steps:

1 To open SPEEDSignal on the desktop PC, double-click the SPEEDSignal

shortcut icon. Or, you can open SPEEDSignal from the Start menu by choosing

Programs+Wave Wireless+SPEEDSignal. If SPEEDSignal was installed in

another folder, select the appropriate directory.

SPEEDSignal shortcut icon

2 When you open SPEEDSignal on the desktop PC, the SPEEDSignal Login

dialog box appears, as shown in the example below.

Enter the Node IP address (or hostname if you are using a Domain Server) of

the node you want to connect to in the Node IP Address text box.

The passwords are defined, based on user class level, in the SPEEDLAN 9000

Configurator. You need to enter the "Full Access" password as configured in

the SPEEDLAN Configurator. For more information, see Classes of Users (and

Passwords), page 3-10. Note: Also, if you want SPEEDSignal to recall the

password for future logins, click Remember Password. Click Login.

For demo mode only