User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
8-4 Using SPEEDView
2 The SPEEDView Login dialog box appears.
Figure 8-2: SPEEDView Login dialog box
3 Enter the IP address (or hostname if you are using a Domain Name Server) of
the 9000 node you want to connect to in the Node IP Address text box. The
last 10 previous IP addresses can be selected in this drop-down box.
4 The passwords are defined, based on user class level, in the SPEEDLAN 9000
Configurator. Before you enter the password, decide which account level you
should enter:
• Administrator: allows access to all of SPEEDView’s features (for adminis-
trative use only). The default full access password is “wave_full”.
• Read Only: limits the following features: TCP dump functions, bandwidth
tests, bandwidth toolbar and block and unblock features (items under the
Link menu). The default read-only passwords are “wave_wired" for wired
nodes or "wave_wireless" for wireless nodes.
Note: You can change the password(s) in the SPEEDLAN 9000 Configurator. The
minimum password length is 8 characters. (You can enter 8 characters.) The maximum
password length is 16 characters (including the underscore character or spacebar).
Note: If you want SPEEDView to recall the password for future logins, click Remember
Password. Also, make sure you change the default password for security purposes.
5 Click Login.
Note: The Status box (blank text box) at the bottom of the screen displays the status of
the connection.
for previewing
SPEEDView