User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
8-14 Using SPEEDView
These shortcuts are described in the section called The Node, Link, View and Stats
Menus (on the Main tab), page 8-11.
Note: Block and Unblock are used for mesh networks only.
Performing a Bandwidth Test
1 Click the node pair or link that you want to test.
2 Choose Bandwidth Test under the Link menu. The Bandwidth Test dialog box
will appear, as shown in Figure 8-10 on page 8-14.
Figure 8-10: Bandwidth Test dialog box
The elements on the Bandwidth Test dialog box are described below:
• a: Tests the full duplex path (e.g., from Node A to B and then from Node B to
A).
• b: Tests the path going to the right (e.g., from Node A to Node B).
• c: Tests the path going to the left (e.g., from Node B to Node A).
• d: The length of time (in seconds) for the bandwidth test.
a
d
f
g
c
e
b
Displays IP address of
left selected node.
Displays IP
address of
right selected
node.
h