User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-60 General Functions of the Configurator
• Internal Server: Enter the IP address of the computer on the network that will
host the service.
• Internal Port (if applicable): If the port is different than the standard for that
service, enter it here.
When finished making changes, click Add Server. This will add the server to the
existing internal servers list. If the service has multiple TCP or UDP ports defined, a pop
up will appear allowing you to map these to ports on the internal server.
Existing Internal Servers
To remove an internal server, select its check box and click Delete Selected. Click
Select All to select all of the existing internal services. Click None to clear all
selections.
1:1 NAT
To access 1:1 NAT settings, choose 1:1 NAT from the Forwarding menu. The
following page will appear:
Figure 3-45: 1:1 NAT page