User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-69
Wireless Statistics
Transmitte d
• Unicast Frames: Total number of unicast frames transmitted.
• Multicast Frames: Total number of multicast frames transmitted.
• Deferred Transmission: Total number of frames for which one or more
transmission attempt(s) was deferred to avoid a collision.
• Single Retries: Total number of frames successfully transmitted after one (and
only one) retransmission.
• Multiple Retries: Total number of frames successfully transmitted after more
than one retransmission.
• Retry Limit Exceeded: Total number of frames not transmitted successfully
because the retry limit was reached.
• Discards: Total number of frames discarded to free up buffer space.
Received
• Unicast Frames: Total number of unicast frames received.
• Multicast Frames: Total number of multicast frames received.
• Star Topology Frames: Total number of star topology frames received.
• Mesh Topology Frames: Total number of mesh topology frames received.
• Foreign 802.11 Frames: Total number of 802.11 frames received.
• FCS Errors: Total number of frames considered to be destined for this station,
but received with an FCS error.
• Overruns: Total number of frames discarded to free up buffer space.
Inbound & Outbound
Refer to the definitions below for traffic moving inbound or outbound, depending on
the direction of movement. Each inbound and outbound statistic is defined below:
• Interface: The interface on which this entry is effective.
• IP address: This address tells the network how to locate the computers or
network equipment connected to it.
• Packets: A unit of data transmitted between a receiver and a sender. Each
packet contains embedded information, as well as a place to go on the
network (known as the IP address).
• Bytes: The length of the packet.