User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-78 General Functions of the Configurator
Access for Wireless SPEEDSignal
This feature is used to enable or disable Pocket PC PDAs to communicate with
SPEEDSignal.
• Click the Enabled option to enable communication with SPEEDSignal.
• Click the Disabled option to disable communication with SPEEDSignal. Click
Apply when finished.
Note about upgrading SPEEDSignal: After upgrading an earlier version than 3.0,
the default setting for SPEEDSignal for Pocket PC PDA is disabled. After upgrading a
version greater than 3.0, the current state is maintained.
Reset to Factory Default
If you need to reset the entire configuration of the SPEEDLAN 9000 to factory default
settings, click Reset All Configuration to the Factory Default.