User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
4-10 Using the Configurator to Set Up Special Parameters for a Base Station
Wireless menu
Choose Configuration from the Wireless menu, and click one of the following
buttons:
• If you click the Channel and Rates button, you will be able to select the
channel and signaling rate of the interface. For more information, see
Channel and Rates, page 4-10.
• If you click the Tx Retries button, you will be able to set the Transmit Retry Limit
and Signaling Rate Fallback. For more information, see Max Tx Retries and
Signaling Rate Fallback, page 4-12.
• If you click the Max Throughput button, you will be able to set the Max
Transmit Data Rate in Kb/s. For more information, see Max Throughput
(Regulating Bandwidth), page 4-14.
Channel and Rates
Figure 4-6: Channel and Rates page
• Primary Firmware: This is the current primary firmware version in use by the
wireless card.
• Station Firmware: This is the current station firmware version in use by the
wireless card.