User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
4-12 Using the Configurator to Set Up Special Parameters for a Base Station
Max Tx Retries and Signaling Rate Fallback
This page includes two features: Max Tx Retries and Signaling Rate Fallback. On the
figure below, Max Tx Retries is circled in red and Signaling Rate Fallback is circled in
blue. The following page appears when the Tx Retries button is clicked:
Figure 4-7: Tx Retries and Signaling Rate Fallback page
Note: To apply settings to other network nodes, select them and click Apply to
Selected Nodes.
Max Tx Retries
Wave Wireless recommends that you use this parameter to increase the throughput of
your wireless network. This parameter tells a network node the maximum number of
times a unicast frame can be retransmitted before it is discarded. (A unicast frame is
one that is transmitted to a single node in a network.) This allows a network manager to
tune a network for its particular topology and expected traffic characteristics. The
network topology, RF environment, number of nodes, throughput requirements, latency
requirements, and type of applications are all factors in choosing an appropriate value
for this parameter.
vx.xx