User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide

2-22 SPEEDLAN 9101, 9102, 9103 & 9104 Hardware

Step 8. Connect the Wireless Router to the Power Supply

a) Connect the DC output of the adapter (24-36 Vdc) to DC jack on the indoor

junction box.

b) Connect power cord of AC-DC 24-36 Vdc adapter to 110 or 220 VAC power

outlet (the input voltage of this universal adapter can vary from 100 to 250

VAC).

Step 9. Adding Additional Routers

Repeat the steps above for all SPEEDLAN 9102 and 9103 routers that will be

communicating with this one.

9102/9103 Installation Diagram

Figure 2-13: Base/CPE complete installation diagram

Router

3’ cable

Lightning arrestor

Grounding wire

AC wall outlet

Ethernet

10’ cable

*Antenna

(e.g., grid,

Junction

box

Cable with

combined Ethernet

and DC voltage

sectoral or

high-gain omni)

hub/

switch

Power

supply

Ground