User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-3
Connecting a SPEEDLAN 9000 and a Client PC
A connection between a SPEEDLAN 9000 and a client PC may be
established using either:
1 one crossover cable, or
2 two straight-through cables (also called patch cables) and a hub or a switch.
• If you select option # 1, connect one end of the crossover cable to the client
PC and the other end to the junction box.
Figure 3-1: Using one crossover RJ-45 Ethernet cable
Figure 3-2: Crossover cable and pin out diagram
Router
Junction box
Client PC
To ra d io
To LA N
Either end of the
crossover cable
can connect to the
client PC or
junction box.