User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-10 General Functions of the Configurator
Diagram of SPEEDLAN 9000 Configurator Main Menu
Figure 3-4: Main menu
Note: If you want to learn more about IP addressing, see Basics of IP Addressing,
page 9-2.
Logging on the SPEEDLAN 9000 Configurator
To access the SPEEDLAN 9000 Configurator, open your web browser and enter the URL
(http://) or IP address of the router you want to configure. The factory default IP address
is 192.168.69.1.
Note: The SPEEDLAN 9000 Configurator can be accessed at the standard web (HTTP,
port 80) and secure web (HTTPS, port 443) locations. If you have forwarded either of
those ports to internal network nodes, you can still reach the configurator at an
alternate location:
• port 6590 - server alternate HTTPS (for example, type "https://
192.168.69.1:6590/")
Classes of Users (and Passwords)
All software including the SPEEDLAN 9000 Configurator, SPEEDView, SPEEDSignal and
IP Recovery share the same password(s). The only place where you change the
password for all of these is in the SPEEDLAN 9000 Configurator.