User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-20 General Functions of the Configurator
9000 Firmware Updates, SPEEDView or Other Utility Programs
Registered customers should check our web site on a regular basis for updates to router
firmware, SPEEDView, and other utility programs. If you haven't registered your
products yet, you may do so by visiting the Wave Wireless Web site "Support" directory.
If You Need a Temporary IP Address
See the section called, What is IP Recovery?, IP Recovery, Appendix A-2:
• If you changed the IP address on the router and forgot it, you can find the
configured IP address of the Ethernet interface using IP Recovery.
OR
• If after learning the IP address of the Ethernet interface, you cannot log on to
the router using the HTML Configurator (SPEEDLAN 9000 Configurator), then
you will be able set a temporary Ethernet IP address so that a connection can
made.
The Configuration Menu
Network Menu
• Choose Interfaces to select the router you need.
• Choose IP Addresses from the Network menu to assign an IP address
(manually or dynamically via DHCP).
• Choose Virtual Addresses from the IP Addresses submenu (under the
Network menu) to create a public IP address that can be mapped to a private
IP address.
Network Interfaces
Choose the type of router as shown in Figure 3-14 on page 3-17. Then, click Apply.
IP Address Configuration
This is where you would assign IP Addresses either Manually (static) or via DHCP
(dynamic). For DHCP, you may also enter the hostname of the client.
Note: DHCP is not available on the wireless interface.