User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-26 General Functions of the Configurator
• System Version: Displays the firmware version and uptime for the unit.
• Network Interfaces: Displays the interfaces on the network.
• Route Table: Displays the routing information between destinations.
• Wireless Configuration: Displays the channel, signaling rates, Max Tx
Retries, Signaling Rate Fallback and Max Throughput.
• Blocked Wireless Links: Displays blocked links. For more information, see
Receive (Rx) Threshold Parameter, page 7-11.
• RIP Configuration: Indicates if RIP is on or off.
• DHCP Server Configuration: Indicates if DHCP Server Configuration is on
or off.
• DHCP Relay Configuration: Indicates if DHCP Relay Configuration is on or
off.
• Virtual Addresses: Displays virtual addresses.
• NAT: Displays types of NAT.
• Firewall: Displays if the firewall is enabled or disabled.
• ARP Table: Displays Address Resolution Protocol statistics.
• Statistics: Displays statistics about the wireless inbound and outbound traffic.
Note: Select the appropriate feature (noted via blue-underlined hyperlink) to jump to
the proper feature page. For example, if you click the DHCP Relay Configuration link
on the Configuration Summary page, it will bring up the DHCP Relay Configuration
page where you can modify further information.