User Manual
SPEEDCOM SC5800 User Manual
26
4.2.3 Connecting a DC Power Supply
WARNING – See Section 8.4, Power Supply Equipments, page 59 for
specification of the power supply.
1. Observing the polarity of the supply, wire up the supplied power connector
cable plug and connect it to the DC supply (21 to 56 V) through a minimum 5
A circuit breaker.
2. Check the supply voltage using a multimeter.
3. Secure the connector screws to the unit.
DC Power Connector Pinouts
Indoor unit connector
Gray
Pin
No
Signal
+
DC POWER
2-pin Wieland Type 8213
+-
DC
-
DC POWER RETURN