User Manual

SPEEDCOM SC5800 User Manual

9 APPENDIX A: ELEMENT MANAGER PORT POINT-TO-

POINT SERIAL COMMUNICATIONS SETUP

This appendix summarizes how to set up a network connection (using PPP) between a computer

and the SC5800 Indoor Unit’s Element Manager port. It lists how the connection can be setup

and configured to allow data transfer and SNMP-based control of the SC5800 Indoor Unit.

Note: For both NT and Win 95 or 98 machines, check that a Network Adapter is installed.

The following screen capture shows the Windows help available to assist setting up

a serial comms network adapter. This screen appears when the Help function is

activated.