User Manual

ManualsBrandsWave Wireless Networking ManualsElectronicsPoint to Point Spread Spectrum Transceiver

100

SC5800 User Manual

Object ID Group Object Type Access Description

received traps.

1.3.6.1.4.1.1316.1.1.1.3.3.3.1.

mdrmteTrapManagerComm DisplayString read-write This is the “SNMP community

name” used for dispatch of

traps.

1.3.6.1.4.1.1316.1.1.1.3.3.3.1.

mdrmteTrapManagerActive INTEGER read-write Defines whether a particular

Trap Manager is active or

inactive.

1.3.6.1.4.1.1316.1.1.1.3.4 mdrmtePerfTrapThreshold

1.3.6.1.4.1.1316.1.1.1.3.4.1 mdrmteMinorPERThreshold DisplayString read-write Defines the threshold used as a

checking criterion for the Minor

PER (Packet Error Rate).

1.3.6.1.4.1.1316.1.1.1.3.4.2 mdrmteMajorPERThreshold DisplayString read-write Defines the threshold used as a

checking criterion for the Major

PER (Packet Error Rate).

1.3.6.1.4.1.1316.1.1.1.3.4.3 mdrmteCriticalPERThreshold DisplayString read-write Defines the threshold used as a

checking criterion for the Critical

PER (Packet Error Rate).

1.3.6.1.4.1.1316.1.1.1.3.4.4 mdrmteErrSecRatioThreshold DisplayString read-write Defines the threshold used as a

checking criterion for the

Errored Second Ratio.

1.3.6.1.4.1.1316.1.1.1.3.4.5 mdrmteSevErrSecRatioThreshold DisplayString read-write Defines the threshold used as a

checking criterion for the

Severely Errored Second Ratio.

1.3.6.1.4.1.1316.1.1.1.3.4.6 mdrmteBkgrndBlkErrRatioThreshold DisplayString read-write Defines the threshold used as a

checking criterion for the

Background Block Error Ratio.

1.3.6.1.4.1.1316.1.1.1.3.5 mdrmteEventLogTable SEQUENCE

1.3.6.1.4.1.1316.1.1.1.3.5.1 mdrmteEventLogEntry SYNTAX

1.3.6.1.4.1.1316.1.1.1.3.5.1.1 mdrmteEventIndex INTEGER

1.3.6.1.4.1.1316.1.1.1.3.5.1.2 mdrmteEventDate DisplayString read-only Lists the date on which the

event occurred.

1.3.6.1.4.1.1316.1.1.1.3.5.1.3 mdrmteEventTime DisplayString read-only Lists the time when the event

occurred.

1.3.6.1.4.1.1316.1.1.1.3.5.1.4 mdrmteEventType INTEGER read-only Lists the type of event -

informational, minor, major or

critical.

1.3.6.1.4.1.1316.1.1.1.3.5.1.5 mdrmteEventDescription DisplayString read-only Textual description of the logged

event.

1.3.6.1.4.1.1316.1.1.1.3.6 mdrmteClearEventLog INTEGER write-only This entry is used to clear the

Event Log.

1.3.6.1.4.1.1316.1.1.1.3.7 mdrmteResetAllFaults INTEGER write-only

1.3.6.1.4.1.1316.1.1.1.3.8

mdrmteEnableDebug INTEGER read-write This entry is used to enable test

and debugging features

1.3.6.1.4.1.1316.1.1.1.3.9

mdrmteErrorWindow INTEGER read-write This entry is used to set the

time period in minutes during

which errors are counted, but

not logged.

1.3.6.1.4.1.1316.1.1.1.4 mdrmteAccess

1.3.6.1.4.1.1316.1.1.1.4.1 mdrmteEthernetIPAddress IpAddress read-write The IP address associated with

product's Ethernet port (NOTE :

USE A POWER-ON RESET OR

RESET BUTTON POSITION ‘3’

TO ALLOW ACCEPTANCE OF

THE NEW IP ADDRESS – I.E.