User Manual

Hardware Installation Guide 4-1

. . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ACK

OUNTING

Figure 4-1 Rack Mounted Radios

An AirPro Gold

unit can be mounted in a standard 19 inch or 23 inch

equipment rack (see Figure 4-1), using brackets and hardware provided

in the shipping carton.

The rack mounting brackets can be installed on the unit chassis in one of

three positions: front, center, or rear, depending on how you want the

chassis positioned in the rack.

When installing the unit in a rack with other equipment, you must provide 1.75

inches of space above, below, and on each side of the unit to allow proper

ventilation.

For a 19 inch rack, short bracket flanges face the front of the unit. See

Figure 4-2 on page 4-2. For a 23 inch rack, longer bracket flanges face

the front of the unit. See Figure 4-3 on page 4-3.

Front Flange

Screws

(Supplied by

Customer)

APG2_003

Ethernet

RS232

RSQ/RSSI

Alarm

Link

Frame TX

Ethernet Link

Ethernet Activity

Power