User's Manual
Table Of Contents
- Features and Benefits
- SPEEDLAN 9200 Mesh Protocol -- How It Works in Mesh Cells
- Document Changes/Corrections
- Contacting Technical Support
- Rooftop and Tower Installations Warning
- Regulatory Information
- Declaration of Conformity for RF Exposure
- General Safety Requirements for Installation of SPEEDLAN 9200 Models
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9202/SPEEDLAN 9203/SPEEDLAN 9205 with External Antenna
- Manual Initial Configuration of the SPEEDLAN 9200
- Overview of the SPEEDLAN 9200 Configurator General Main Menu
- Logging on the SPEEDLAN 9200 Configurator
- Helpful Information to Know...
- The Configuration Menu
- Network Menu
- System Menu
- Routing Menu
- Configuring the Radio Parameters
- DHCP Server Menu
- Setting Up DHCP and DHCP Relay
- Forwarding Menu
- Three Features of NAT
- Firewall
- IP Sessions
- Diagnostics Menu (Troubleshooting the Network)
- Admin Menu
- Network Menu
- Wireless menu
- Admin Menu
- Basics of IP Addressing
- Basics of Routing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Appendices (A-F)
- Changing the Router's Topology Mode
- SPEEDLAN 9200 Configurator Passwords
- Manufacturer Information
- Radio Approvals
- SPEEDLAN 9200 Technical Specifications
- List of Acronyms
- Channels for IEEE 5GHz OFDM (UNII upper band)
- 2.4GHz DSSS Channels 2.4GHz OFDM Channels
- Software License Agreement
Part # 34357-MNL Rev.03 SPEEDLAN 9200 User Guide
3-72
To view ICMP information, choose ICMP Stats from the Diagnostics menu. The
following page will appear.
Figure 3-51: ICMP page
The In Bound statistics are defined below:
• Msgs: The total number of ICMP messages which the entity received. Note
that this counter includes all those counted by icmpInErrors.
• Errors: The number of ICMP messages which the entity received but
determined as having ICMP-specific errors (bad ICMP checksums, bad length,
etc.).
• Dest Unreach: The number of ICMP Destination Unreachable messages
received.
• Time Exceeds: The number of ICMP Time Exceeded messages received.
• Param Problems: The number of ICMP Parameter Problem messages
received.
• Src Quenches: The number of ICMP Source Quench messages received.
• Redirects: The number of ICMP Redirect messages received.
• Echos: The number of ICMP Echo (request) messages received.
• Echo Replies: The number of ICMP Echo Reply messages received.
• Timestamps: The number of ICMP Timestamp (request) messages received.