User's Manual

SPEEDLAN 9200 User Guide Part # 34357-MNL Rev.03
3-11
Classes of Users (and Passwords)
All software including the SPEEDLAN 9200 Configurator and SPEEDManage share the
same password(s). The only place where you change the password for all of these is in
the SPEEDLAN 9200 Configurator. For more information about SPEEDManage, see
the SPEEDManage User Guide.
There are five classes of users on the SPEEDLAN 9200. The classes are as follows with
their default passwords:
• Full Access (also known as a superuser): "wave_full" (this is also the only
access password for IP Recover in the SPEEDManage suite). Use this option
when changing passwords. You cannot change the password to an existing
password.
Note: "Full Access" does not show up in "Admin/Users" because the user will
not be able to change its permissions and it has write permission on
everything.
• Wired Admin: "wave_wired_admin" (account for the private Ethernet network)
• Wired Read: "wave_wired" (account for the private Ethernet network)
• Wireless Admin: "wave_wireless_ad" (account for the wireless SPEEDLAN
9200 network)
• Wireless Read: "wave_wireless" (account for the wireless SPEEDLAN 9200
network)
Notes:
The minimum password length is 8 characters. The maximum password length is 16
characters (including the underscore character or spacebar). Any characters over the
maximum length (16) will be truncated. This rule applies for the Configurator and the
SPEEDManage suite.
Admin accounts have administration rights to their appropriate network (wired or
wireless), and Read Only accounts have only read only access.
If you are a network administrator and want to modify the default passwords and
settings for any of the users, choose the Admin menu. For more information, see
Admin Menu, page 3-74.