User's Manual
Table Of Contents
- Features and Benefits
- SPEEDLAN 9200 Mesh Protocol -- How It Works in Mesh Cells
- Document Changes/Corrections
- Contacting Technical Support
- Rooftop and Tower Installations Warning
- Regulatory Information
- Declaration of Conformity for RF Exposure
- General Safety Requirements for Installation of SPEEDLAN 9200 Models
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9202/SPEEDLAN 9203/SPEEDLAN 9205 with External Antenna
- Manual Initial Configuration of the SPEEDLAN 9200
- Overview of the SPEEDLAN 9200 Configurator General Main Menu
- Logging on the SPEEDLAN 9200 Configurator
- Helpful Information to Know...
- The Configuration Menu
- Network Menu
- System Menu
- Routing Menu
- Configuring the Radio Parameters
- DHCP Server Menu
- Setting Up DHCP and DHCP Relay
- Forwarding Menu
- Three Features of NAT
- Firewall
- IP Sessions
- Diagnostics Menu (Troubleshooting the Network)
- Admin Menu
- Network Menu
- Wireless menu
- Admin Menu
- Basics of IP Addressing
- Basics of Routing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Appendices (A-F)
- Changing the Router's Topology Mode
- SPEEDLAN 9200 Configurator Passwords
- Manufacturer Information
- Radio Approvals
- SPEEDLAN 9200 Technical Specifications
- List of Acronyms
- Channels for IEEE 5GHz OFDM (UNII upper band)
- 2.4GHz DSSS Channels 2.4GHz OFDM Channels
- Software License Agreement
Part # 34357-MNL Rev.03 SPEEDLAN 9200 User Guide
3-16
9 You will see a confirmation stating that the import was successful. Click OK.
Click OK again. If the Security Alert dialog box appears, click Yes.
Figure 3-12: Certificate Import Wizard message box
You should not get the Security Alert the next time you access this site. The SPEEDLAN
9200 Configurator web site will appear.
After Logging On
After you log on, you will see the Network Interfaces page, as displayed below.
Figure 3-13: 1st screen after logging on
Elements to know on the Network Interfaces page:
• If you click the interface link, Ethernet, you will jump to the IP Addresses page.
• The "Interface Type" drop-down list is where you select the type of router. To
select a different mode, select it and click Apply. The Configurator will log you
out, and the next time you log in the mode will be available.
• Click the Refresh button to refresh data.
• The name you enter in the Network Name text box (shown in Figure 3-13 on
page 3-16) determines what the interfaces are called on the network. For
instance, you can enter, "Star Net" in the Network Name text box to represent