User's Manual
Table Of Contents
- Features and Benefits
- SPEEDLAN 9200 Mesh Protocol -- How It Works in Mesh Cells
- Document Changes/Corrections
- Contacting Technical Support
- Rooftop and Tower Installations Warning
- Regulatory Information
- Declaration of Conformity for RF Exposure
- General Safety Requirements for Installation of SPEEDLAN 9200 Models
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9202/SPEEDLAN 9203/SPEEDLAN 9205 with External Antenna
- Manual Initial Configuration of the SPEEDLAN 9200
- Overview of the SPEEDLAN 9200 Configurator General Main Menu
- Logging on the SPEEDLAN 9200 Configurator
- Helpful Information to Know...
- The Configuration Menu
- Network Menu
- System Menu
- Routing Menu
- Configuring the Radio Parameters
- DHCP Server Menu
- Setting Up DHCP and DHCP Relay
- Forwarding Menu
- Three Features of NAT
- Firewall
- IP Sessions
- Diagnostics Menu (Troubleshooting the Network)
- Admin Menu
- Network Menu
- Wireless menu
- Admin Menu
- Basics of IP Addressing
- Basics of Routing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Appendices (A-F)
- Changing the Router's Topology Mode
- SPEEDLAN 9200 Configurator Passwords
- Manufacturer Information
- Radio Approvals
- SPEEDLAN 9200 Technical Specifications
- List of Acronyms
- Channels for IEEE 5GHz OFDM (UNII upper band)
- 2.4GHz DSSS Channels 2.4GHz OFDM Channels
- Software License Agreement
![](/manual/wave-wireless/sl9201/user-s-manual-english/images/img-78.png)
Part # 34357-MNL Rev.03 SPEEDLAN 9200 User Guide
3-36
Route Table
The routing table displays routing information between destinations. To view routing
information, choose Route Table from the Routing menu. The following page will
appear.
Figure 3-27: Route Table page
Each statistic is defined below:
• Destination: This is the destination network or host.
• Netmask: The netmask is a 4-byte number that masks the network part of the
Internet IP address, so only the host computer part of the address remains.
• Gateway: This is a network point that acts as the "entrance door" to another
network. This is the first router that takes you to the designated host (i.e., the
next hop on the network).
• Metric: Metric is a number indicating the preference of one route link over
another. A route link with a lower number will be chosen over one with a
higher number.
• Interface: This specifies which network interface the route will use.
• Source: This lists the how the information is routed to/from the router (e.g.,
RIP enabled, static or connected route).