User's Manual

SPEEDLAN 9200 User Guide Part # 34357-MNL Rev.03
3-37
Static Route
The Static Route page allows you to add static routes that the SPEEDLAN 9200 routers
do not contain in their routing table. To open the Static Route page, choose Static
Routes from the Routing menu.
Figure 3-28: Static Route page
Terms for this page are defined below:
• Type: Select either Network or Host from this drop-down list.
• Network: Traffic will be destined either to, from or between network seg-
ments.
• Host: Traffic will be destined either to, from or between specific hosts.
• Destination: The destination network or host.
• Netmask: Select the appropriate value for the netmask (also in CIDR format
from /8 to /30) in this drop-down list. This is an abbreviated method of
entering the netmask. For more information, see CIDR Table (For Netmask
Information Purposes), page 3-21.
• Interface: Select the appropriate interface from this drop-down list.
• Gateway: This is a network point that acts as the "entrance door" to another
network. This is the first router that takes you to the designated host (i.e., the
next hop on the network).
Note: If you do not want to use a current static route, select the routes you
want to remove and click Delete Selected. To add a new static route, click
Add.
..
.