User's Manual

SPEEDLAN 9200 User Guide Part # 34357-MNL Rev.03
3-47
• Known Clients: Click this button if you want to assign specific IP
addresses to specific client computers on a given subnet. This feature will
also enable you to allow or decline specific client requests. For more
information, see Adding a Known Client.
Adding a New DHCP Subnet
1 To add a new DHCP subnet, click Add Subnet on the DHCP page. The
following page will appear:
Figure 3-34: Adding a New DHCP Subnet
Notes: After you have added a subnet, you can click the IP address under the
"Ethernet/Mesh Net" Network section, as circled Figure 3-34 on page 3-47, which
populates the following information:
• Network
• Netmask
• IP Start
• IP End
• Default Gateway
Notes:
In most cases, if you use values that are compatible with the appropriate network, you
will only need to change a few values (e.g., the last octet of "IP Start" and "IP End").
When you define the range of IP addresses to be assigned, make sure you do not
include any of the static IP addresses that you have assigned on the network.