User's Manual
Table Of Contents
- Features and Benefits
- SPEEDLAN 9200 Mesh Protocol -- How It Works in Mesh Cells
- Document Changes/Corrections
- Contacting Technical Support
- Rooftop and Tower Installations Warning
- Regulatory Information
- Declaration of Conformity for RF Exposure
- General Safety Requirements for Installation of SPEEDLAN 9200 Models
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9202/SPEEDLAN 9203 with External Antenna
- Manual Initial Configuration of the SPEEDLAN 9200
- Overview of the SPEEDLAN 9200 Configurator General Main Menu
- Logging on the SPEEDLAN 9200 Configurator
- Helpful Information to Know...
- The Configuration Menu
- Network Menu
- System Menu
- Routing Menu
- Configuring the Radio Parameters
- DHCP Server Menu
- Setting Up DHCP and DHCP Relay
- Forwarding Menu
- Three Features of NAT
- Firewall
- IP Sessions
- Diagnostics Menu (Troubleshooting the Network)
- Admin Menu
- Network Menu
- Wireless menu
- Admin Menu
- Basics of IP Addressing
- Basics of Routing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Appendices (A-F)
- Changing the Router's Topology Mode
- SPEEDLAN 9200 Configurator Passwords
- Manufacturer Information
- Radio Approvals
- SPEEDLAN 9200 Technical Specifications
- List of Acronyms
- Channels for IEEE 5GHz OFDM (UNII upper band)
- 2.4GHz DSSS Channels 2.4GHz OFDM Channels
- Software License Agreement
Part # 34357-MNL Rev.03 SPEEDLAN 9200 User Guide
3-52
• Services - Defines a network service (e.g., web server, FTP and email server)
between the client and server nodes on your network. When you create a
service, you will be allowed to forward public services inward to the internal
(privately addressed) servers on your network. See Services, page 3-53.
• Address Sharing - Address Sharing uses Network Address Translation (NAT)
to allow you to share public IP addresses with privately addressed network
nodes in order for them to access the Internet. See Address Sharing,
page 3-58.
• Internal Servers - Allows an administrator to make a service available from
an IP address, even though the owner of the IP address may not be actually
providing the service. See Internal Servers, page 3-60.
• 1:1 NAT - Allows an administrator to statically map a public IP address to the
private IP address of one of the nodes on your network. This is useful when
trying to preserve a limited number of IP addresses on the WAN network. See
1:1 NAT, page 3-62.
• Firewall - The SPEEDLAN 9200 (via the SPEEDLAN 9200 Configurator)
allows you to control incoming and outgoing traffic. A firewall prevents
unauthorized access to a network. Utilizing the SPEEDLAN 9200 Configurator,
SPEEDLAN 9200 routers can increase security and provide additional support
to users of the network. See Firewall, page 3-63.
• lP Sessions - The SPEEDLAN 9200 firewall offers stateful packet filtering. IP
Sessions allows you to view sessions whose state is currently active. See
IP Sessions, page 3-68.
Priority Queuing
Use this page to prioritize traffic out its wireless interface. Select the Enabled option to
activate the Priority Queuing feature. This feature is enabled by default. Select
Disabled to turn off this feature. To open this feature, choose Queuing from the
Fowarding menu. The following page will appear:
Figure 3-38: Setting Up Priority Queuing