Toothbrush Speaker System Model: W1BTS
Introduction Thank you for purchasing the W-1, the world's first electric toothbrush speaker system with Alexa enabled! The W-1 works double duty in the bathroom through a seamless integration of two devices that perform important functions within a person’s daily routine. The electric toothbrush is built with leading technology to provide effective teeth cleaning through a powerful 4-speed motor and sonic wave brush head.
Important Safeguards When using electrical products, basic safety precautions should always be followed. You can reduce your risk of injury by following these guidelines. Please read (and save) all instructions before using your W-1. WARNINGS/CAUTIONS To reduce the risk of burns, electrocution, fire or injury: 1. Do NOT drop, hit or shake the device. 2. Do NOT place heavy objects on top of the speaker. 3.
MEDICAL WARNING 1. If you have a pacemaker or other implanted device, consult your physician prior to using your W-1. 2. Consult your physician prior to using your W-1 if you have any medical concerns. 3. Consult your dental professional before you use your W-1 if you have had oral or gum surgery in the previous six months. 4. This product is designed to clean your teeth, gums and tongue only. Discontinue use of this product and contact a physician/dentist if discomfort or pain occurs.
Package Contents Toothbrush Handle Bluetooth Speaker Toothbrush Head Detachable Wall Mount Plate USB-C Charging Cable
Charging the Toothbrush & Speaker To charge the toothbrush, place it inside the speaker's charging cradle while connected to a power source. The brush is in the correct position when the toothbrush's bristles are pointing towards you. When the toothbrush's battery is low the battery status light will flash 3 times, indicating that it needs to be charged. While charging, the battery status LED will flash red. When charging is complete, the battery status LED will change to a constant white.
Toothbrush Overview Toothbrush Head ------------------------- Toothbrush Handle -------------------Power Button / Brushing Mode -------------------------Selector Battery Status Light ------------------- -------------------- Clean Brushing Mode ------------------- White Brushing Mode --------------- Sensitive Brushing Mode ------------ Face Clean Mode (Requires Atthachment)
Brushing 1. Assembly Mount the included brush head on top of the toothbrush handle's metal shaft with the bristles facing forward. Apply gentle pressure downwards until you hear a click. There should be a small gap between the brush head and handle. To replace a brush head, grip from the top and pull directly away from the toothbrush handle until it detaches. Attach a new brush head following the instructions above. 2.
Toothbrush Features 1. Mode Memory Once a mode is locked it becomes the default mode when the toothbrush is powered back on. This allows for quick one-touch operation of your toothbrush each use. 2. 30-Second Quadrant Timer While the toothbrush is powered on, it will quickly pause every 30 seconds, signalling you to switch over to another quadrant of your mouth (top right, top left, bottom right, bottom left), allowing for an even clean each time. 3.
Speaker Overview Power -------------Bluetooth ---------------------- Pairing Action / Alexa Button ------------------------ Volume Decrease ------- ---------- Volume Increase -------------Toothbrush Charging Cradle
Detachable Wall Mount Plate Slot ----------------------------USB-C Charging Port
Using The Speaker Button Symbol Power Bluetooth Action Action Volume Up Volume Down + _ Button Operation Short Press Function Enable or disable ECO Mode (2 short presses) None Access Alexa from speaker Pick up an incoming phone call Increase speaker volume - Level 0 to 31 Decrease speaker volume - Level 31 to 0 Speaker Status Idle Battery Charging Battery Fully Charged Battery Low Bluetooth Pairing Mode Active Bluetooth Connected Muted Voice Input / Listening Thinking Alexa Talking Exception Notification
2. Pair with a Smart Device To pair the speaker with a smart device for the first time, follow the steps below: i. To begin, ensure the speaker is powered OFF. ii. Enable Bluetooth on your smart device to make it discoverable. iii. Press and hold the POWER button to turn on the speaker. It will begin searching for a device to pair with by default. iv. Locate and select your Wavee W-1 speaker from the device list. (WAVEE-001) v.
vi. Allow the Alexa app to access your microphone by selecting, 'Continue'. vii. Make sure the speaker is powered on and is ready to connect. viii. Alexa app will begin searching for devices. Select WAVEE-001 from the list. ix. Allow the Alexa app to setup your W-1 by selecting 'Continue'. x. Follow the on-screen prompts to complete the setup. To speak to Alexa, press the Action button once. The speaker will chime once and show a cyan ring as it waits for your voice.
Frequent Questions & Troubleshooting 1. Q: How should I clean the speaker? A: Clean the surface of the speaker with a soft, damp cloth (water only). Do not use any sprays near the speaker. Do not use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives. 2. Q: Does the speaker need to be plugged into a power outlet to operate? A: No. The speaker is powered by a lithium ion battery that provides a playback time of 8 hours when fully charged.
7. Q: No response or slow response to Alexa commands A: Alexa voice recognition is activated when the microphone button is depressed on the speaker and Amazon’s Alexa app is open and running in the background of your smart phone. Possible Solutions: o Make sure you downloaded and installed correct Amazon Alexa App. o Make sure have the latest app version. o Make sure you do not have any network issues. o Make sure to speak to the microphone within 1 meter.
Our Promise & Limited Warranty Wavee is committed to providing professional quality products for its customers. If your W-1 is not working properly or you begin to experience any issues, please refer to our frequently asked questions section for quick help. If this does not solve your issue, please email our support team at support@waveeworks.com. We are pleased to help resolve any issues you may have in a timely manner.
Wavee W-1 Techincal Specs TOOTHBRUSH Modes: White: 48,000 vibrations per min Clean: 41,000 vibrations per min Sensitive: 33,000 vibrations per min Controls and Settings: 2-min shutdown timer 30 sec quadrant-interval timer LED Display Mode Indicator Power: Power Source: Rechargeable Lithium ION Battery Approx. 25-day battery life / 240 mins continuous Charging Type: Inductive Physical Features: Dimensions: 180 millimetres length (7.08 inches) 22 millimetres diameter (0.
SPEAKER Wireless Connectivity: Bluetooth 5.0 Amazon Alexa Compatible Inputs: USB Connection: USB-C port On-Board Microphone: Yes Power: Power Source: Rechargeable Lithium ION Battery 8 hours continuous playback time USB-C Device Charging Cable Physical Features: Dimensions: 120 millimetres high (4.72 inches) 115 millimetres diameter (4.52 inches) Weight: 800 grams (1.
For updates, promotions and experience sharing, join our user communities: support@waveeworks.com www.waveeworks.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.
