User's Manual

February 2003
Rev. A
Page 12 of 47
2.2. Additional Part List – Required for Installation
• Outdoor Unit grounding cable
• Indoor Outlet grounding cable (for metal Indoor Outlet only!).
• Outdoor-to-Indoor CAT5 shielded cable (Up to 90 meters).
• Indoor CAT5 cable.
• RJ45 - Installation KIT.
• RJ45 - Crimping tool.
• Adjustable wrench + screwdriver.
2.3. Installation Overview
This section provides installation information for GigAccess™ 2.4 system.

This device can be expected to comply with Part 15 of the FCC Rules provided it is assembled in
accordance with the instructions provided in this document.


Note: Outdoor units and antennas should be installed ONLY by experienced installation
professionals who are familiar with local building and safety codes and, wherever
applicable, are licensed by the appropriate government regulatory authorities. Failure to
do so may void the GigAccess™ product warranty and may expose the end user or the
service provider to legal and financial liabilities. WaveIP and its resellers or distributors
are not liable for injury, damage or violation of regulations associated with the
installation of outdoor units or antennas.

A typical installation scheme is depicted in Figure 2-2.
The installation process should follow the following steps:
1) Select the appropriate location for the Outdoor unit and the indoor Outlet.
2) Mount the Outdoor unit. If you are using detached antenna mount the antenna and
connect it to the Outdoor unit.