User's Manual

February 2003
Rev. A
Page 16 of 47
2.4.2. Mounting and Wiring

Outdoor Unit mounting and installation will be performed only by personal licensed to install
rooftop antenna equipment where such license required by the regulation authorities. On any
installation case, only professional antenna installers will perform Outdoor Unit mounting and
installation.

Outdoor Unit can be mount on a pole or on a wall.
A general description of wall mount is given in Figure 2-3.
Figure 2-3: Wall mount description

WARNING! When using the system for point-to-multi-point all outdoor units must be installed with
a separation distance of at least 20 cm. For a base station or any installation
consisting of more than one outdoor unit (AU or SU) the safety distance for all persons
should be at least 2 meters.
When using the system for point to point (p2p) applications all outdoor units must be
installed with a separation distance of at least 2 meters from all persons during
normal operation
For detailed calculation see: Appendix D: RF Hazard Distance Calculation on page 36
