User's Manual

February 2003
Rev. A
Page 21 of 47
2.5. Subscriber PC Setup
• In Case of specific IP setup - Configure the PC NIC to the same specific IP address as
configured in the Base Controller. For this configuration follow the following steps:
o Press right click on the Network Neighborhood Icon.
o Select the Protocol reed and press properties.
o Choose the Specify an IP address and fill in the required specific IP address.
• In Case of DHCP setup - Configure the PC NIC obtain an IP address from DHCP server.
For this configuration follow the following steps:
o Press right click on the Network Neighborhood Icon.
o Select the Protocol reed and press properties.
o Choose Obtain an IP address from DHCP server.