User's Manual

February 2003
Rev. A
Page 25 of 47
Figure 2-9: Cable connection to Outdoor Unit
The Indoor Outlet side cables assembled as follows:
1. Crimp the RJ45 Plugs on cable ends to form the Outdoor Unit cable.
2. Plug the Outdoor Unit cable to the RJ45 Jack marked “AU/SU”.
3. Plug standard CAT5 cable from the PC to the RJ45 Jack marked “10/100 BT”
4. Plug the DC plug from the AC/DC power supply to the DC jack marked “48VDC”

Warning: Do not attach standard CAT 5 cable from the PC to the Indoor Unit RJ45 jack marked
“AU-SU”. Connecting the PC directly to the Outdoor Unit may cause damaged to the
Ethernet NIC in the PC.

Grounding Screw
Power Supply Cable (in the back side) Ethernet (to PC) Cable to Outdoor Unit
Figure 2-10: Cable connection to Indoor Outlet