User's Manual

WaveIP Ltd. GigAccess™ OFDM 5.8
Pa
g
e 37 of 41
" Operation Mode status window – this field shows the status of the Unit. The
status is different between AU and SU:
o AU Operation Modes:
$ BC Negotiation – the AU tries to negotiate with the Base
Controller in order to get configuration file.
$ Online – the AU has the configuration file (Local Configuration
File or the one it received from the Base controller) and RF
channel is online.
o SU Operation Modes:
$ Scanning – the SU scans the RF channels marked in the RF
channel list and search for the Primary/Secondary AUID.
$ Online – the SU is connected to the AU if the SU exists in the AU
configuration file.
" Channel – the actual RF channels of the AU or SU.
" RF Channel Scan– the RF Channels the SU should scan. This field can be
configured and is relevant for SU only.
" RSSI – this field is used to adjust the position of the SU during installation.
The SU should be position in the direction where the RSSI value is the highest
(Green color). This field is relevant for SU only.
" PER – Packet Error Rate, this field shows the quality of the RF channel for
periodic interference. This field is relevant for SU only.
When the configuration is updated, it can be burned to the unit by pressing Submit.
The Unit performs reset and reconnect to it should be done in order to verify the
changes.
1
1
0
0
.
.
5
5
.
.
1
1
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
W
W
i
i
n
n
d
d
o
o
w
w
The Advanced Window provides the ability to change more parameters of the unit.
Figure 10-6: Advanced Window