User's Manual
WaveIP Ltd.
WipAir Installation Guide
Page
17
of 28
2
2
.
.
3
3
.
.
6
6
C
C
a
a
b
b
l
l
e
e
s
s
The outdoor unit is connected to straight CAT5 Gauge 24-shielded outdoor rated
cable. The cable should be UV resistant, flame retardant, UL listed and contain at
least 4 twisted pairs.
The outdoor cables scheme is indicated in Appendix A
–
Outdoor Cables Scheme.
The Indoor PoE Outlet side and Outdoor Unit side are crimped using RJ-45 tool.
Total length of the CAT5 cables must not exceed 100 meters
The Outdoor Unit side is assembled according to the following steps (Figure 2-5):
• Insert seal bracket (grommet clamping plate) on the cable.
• Insert rubber seal (grommet) on the cable.
• Crimp the RJ-45 Plug.
Figure
2-5: Cable preparation for Outdoor Unit
• Insert the RJ-45 to the Outdoor Unit (Figure 2-6).
• Insert NC-6 screws with spring washer to the seal bracket.