User Manual

Boomer II User Manual & Integrator’s Guide
________________________________
_________________
Installation
BM210012WT09 13 Wavenet Technology
Installation
This section will help you to successfully integrate the Boomer II OEM
Modem into your custom application. Before using your modem you
must:
q Mount the Boomer II OEM Modem to your device
q Connect the Data Interface Port
q Connect and position the antenna
q Supply power
A picture of the Boomer II OEM Modem is shown below.
The modem has the following interfaces:
Data Interface Port 30-way connector
LED Window Power
LED
Green, flashes when scanning
On, when locked
Off, when the modem is off
Receive
LED
Green, flashes when receiving
Transmit
LED
Red, flashes when transmitting
RF Connector MMCX female socket
LED
Window
Data Interface Port
RF Connector