User's Manual
Table Of Contents
- Introduction
- The Integrator’s Task
- Installing the Modem
- Mounting the Boomer II OEM Modem to Your Device
- Connecting the Data Interface Port
- Selecting & Positioning the Antenna
- Supplying Power
- Using the Modem Test Jig
- Software Development Tools
- Integration Testing
- Appendix A - NCL Interface
- Appendix B – SDK NCL-API and Port Server
- Multisession API
- Application Interface
- _
- Opening a Session
- Close Session
- Send Data to a Radio Host
- Receive Data From RPM
- Get RPM Status Information
- Set Configuration ITEMS Within the RPM
- Reset RPM
- Register Event Callback Function
- Enable / Disable Events
- Get Error Description
- Register Wakeup Application
- Deregister Wakeup Application
- Switch RPM On/Off
- Send Generic NCL Command To RPM
- Get Software Version
- _
- A
- Appendix C – SDK Sample programs
- Appendix D - Application Development
- Appendix E - Message Routing and Migration
- Appendix F – Guide to Desense
- Appendix G - Numeric Conversion Chart
- Appendix H - Specifications
- Appendix I - Glossary
Appendix B – SDK NCL-API and Port Server______________________ Boomer II User Manual & Integrator’s Guide
Copyright Wavenet Technology © November 2003 112 BM210012WT37
Description:
Deregister a wakeup application.
Input:
usAppName Pointer to a buffer specifying the full path name (Null terminated)
of the application to execute on a wakeup.
Output:
Return value = 0 Operation was successful
Return value ≠ 0 Operation failed. Value specifies the error type
Switch RPM On/Off
The application can call this function to switch the RPM on or off.
Prototype:
int nclSwitchRPMPower (word usSetting);
Description:
Switch the RPM power to the desired setting.
Input:
usSetting If this value is zero, the RPM should power down else it should
power up
Output:
Return value = 0 Operation was successful
Return value ≠ 0 Operation failed. Value specifies the error type
Send Generic NCL Command To RPM
The application can call this function to send application specific
commands to the RPM.
Prototype:
int nclSendGenericCommand (WORD *usSduTag, BYTE ucLength, BYTE
*ucParam);
Description: