User's Manual

Table Of Contents

Integrator’s Task ____________________________________________ Boomer II User Manual & Integrator’s Guide

Country Requirements

The country requirements given below are provided as a general guide

to the certification processes in the regions and countries given. You

are strongly encouraged to use the services of a consultant or a full-

service test house if you have limited expertise in meeting the

regulatory requirements of a specific country.

All certification tests must be made by a qualified laboratory to ensure

that the equipment complies with the applicable technical standards.

United States of America

The Federal Communications Commission (FCC) requires application

for certification of digital devices in accordance with CFR Title 47,

Part 2 and Part 15. A Wavenet Boomer-II OEM Modem Module is part

of a complete system and certain testing is necessary for the integrated

product.

FCC Part 15, Class A/B certification must be performed with the

maximum configuration used and include all peripherals of the

integrated product. The application for certification must refer to the

approval data on file for the particular Boomer-II Modem Module, as

shown in the following example. Include the following language in the

documentation inserting the name of the integrated product in place of

XXX below:

“The Wavenet Boomer-II OEM modem module is a

subassembly of XXX and has FCC Identifier PQS-BM2800D”

(or PQS-BM2900D as appropriate)

FCC Part 2 certification requires all integrated products to have

routine environmental evaluation for radio-frequency (RF) exposure

prior to equipment authorization or use in accordance with FCC rules

2.1091 and 2.1093 and FCC Guidelines for Human Exposure to Radio

Frequency Electromagnetic Fields, OET Bulletin 65 and its

Supplement C.

For “portable devices”, defined in accordance with FCC rules as

transmitting devices designed to be used within 20 cm of the user body

under normal operating conditions, Specific Absorption Rate (SAR)

testing must be performed and the unit re-submitted for separate FCC

certification approval. An exposure limit of 1.6 W/kg will apply to

most OEM integrated applications.

It is mandatory for portable integrated products such as handheld and

body-worn devices to comply with FCC guidelines for Specific

Absorption Rate (SAR) requirements. Refer to OET Bulletin 65 and

Supplement C (June 2002). The submission should include end product

information, end product SAR/MPE test report, and a reference to the

Wavenet Boomer-II OEM Modem Module FCC ID for all other

Part 90 requirements.